Maybe you want the song from a clip, a lecture to listen to on a walk, an interview to transcribe, or the voiceover from your own video. In each case the job is the same: take the sound out of the video and save it as an audio file, usually an MP3. It sounds technical, but it takes less than a minute.
Here are four free ways to extract audio from a video, which quality to choose, and what to do when something goes wrong.
Why extract audio from a video?
- Listening on the go. Turn a lecture, talk or interview into something you can play with the screen off.
- Transcribing. Audio is easier to hand to a transcription service or tool than a large video file.
- Reusing your own sound. Pull a voiceover or music bed out of a project you made yourself.
- Saving space. An MP3 is far smaller than the video it came from.
Before you start: which audio format?
MP3 plays everywhere: phones, cars, laptops, podcast apps and editing software. It is the right choice unless you have a reason to pick something else. M4A (AAC) gives similar quality at smaller sizes and is what Apple tools often produce. WAV is uncompressed, with the biggest files, and is only worth it if you plan to edit the audio further. When in doubt, choose MP3. If you plan to upload the audio to a podcast host or a transcription service, check which formats it accepts; MP3 is taken almost everywhere.
Method 1: In your browser (no install, nothing uploaded)
The quickest way to get an MP3 from a video file needs no software and no account. The video is processed on your own device, so it is never uploaded.
- Open the free video to MP3 converter. For an MP4 file, the MP4 to MP3 page does the same job.
- Drop in your video. MP4, MOV and WebM all work.
- Pick the audio quality: 128, 192 or 320 kbps.
- Convert and download the MP3.
Long videos take longer, because your browser does the work, and very large files use a lot of memory. Keep the tab open until it finishes.
Method 2: On a Mac with QuickTime
QuickTime Player is already on your Mac. Open the video in it, choose File, then Export As, then Audio Only. The result is an M4A file. If you specifically need an MP3, use the browser method above, which gives you an MP3 directly.
Method 3: With VLC (Windows, Mac and Linux)
VLC, the free media player, can convert as well as play. Choose Media, then Convert / Save, add your video, and pick an audio profile such as Audio - MP3. Set a destination file name ending in .mp3 and press Start. VLC's menus are fiddly and the file name step is easy to miss, so treat it as a good fallback rather than the first choice.
Method 4: On your phone
The simplest route on any phone is the browser converter above, which runs in Safari or Chrome with nothing to install. On an iPhone you can also build a short shortcut in the Shortcuts app using the Encode Media action set to audio only. It takes a few minutes to set up and then works from the share sheet. Many Android video editors and file apps offer an extract audio option too, but they vary from phone to phone.
Which quality should you choose?
| Setting | Best for | Size of a 5-minute file |
|---|---|---|
| 128 kbps | Speech, podcasts and lectures | About 5 MB |
| 192 kbps | Music and general use | About 7 MB |
| 320 kbps | The highest MP3 quality, for music | About 12 MB |
The sound can only be as good as the video's own audio. Extracting at 320 kbps from a low-quality clip will not improve it; it only makes the file bigger. For speech, 128 kbps is usually plenty. For music, 192 kbps sounds good to most people.
Extracting audio from a long video
A one-hour video produces an MP3 of roughly 55 MB at 128 kbps, and the conversion takes a while. The browser method needs enough free memory for the whole file, so a very long or very large video can struggle on an older phone or laptop. If that happens, close other tabs, try a shorter file, or use a desktop player such as VLC, which is not limited by browser memory.
Tips for the best result
- Start from the best copy of the video you have. A video that has been compressed and shared many times already has weaker sound.
- Trim the result in any audio editor if you only need part of it.
- Name the file clearly so you can find it again later.
- Check the sound by playing the MP3 before you delete the video.
- Mind the rights. Only extract audio you own or have permission to use. Music in other people's videos is usually protected by copyright.
Common problems and fixes
- The MP3 is silent. The video may have no audio track, or the sound may have been muted in the original. Play the video first to confirm it has sound.
- The conversion is slow. Long videos take time on any device. Close other heavy tabs and keep the converter tab open.
- The file is too big. Choose 128 kbps. Even then a long recording adds up to roughly 1 MB per minute.
- Nothing plays on my phone. Make sure the file ends in .mp3, and open it from the Files app or a music player.
What can you do with the audio?
Extracted audio is useful well beyond listening. You can turn a recording into text, add the sound to a presentation, or publish it as a podcast episode. You can also send a voice recording to a friend without a heavy video attachment, which is far easier to open on almost any phone.
Common questions
Is it legal to extract audio from a video? For your own videos and content you have permission to use, yes. Music, films and other people's work are usually protected by copyright, so check the rules before you reuse them.
Does extracting audio lower the quality? The sound is encoded as an MP3, which loses a very small amount of detail. At 192 or 320 kbps most people cannot hear any difference.
Is my video uploaded? Not in the browser method. The conversion runs on your device using ffmpeg compiled to WebAssembly.
Can I extract audio on my phone? Yes. The converter runs in Safari and Chrome, and your phone does the work.
Drop in a video and get the MP3 in a few clicks.
Convert video to MP3